Roomie IR-E Ethernet IR Adapter – RJ45, Proximity Beacon, USB-C Powered, iOS & macOS

Bring reliable wired-network infrared control to your AV setup with the Roomie IR-E. Connects via standard RJ45 Ethernet for a stable, lag-free connection. Powered by USB-C and features a built-in Proximity Beacon for automatic room detection. The 110-E model includes an infrared learner for programming custom IR codes. Compatible with the Roomie Remote app on iOS and macOS.

Roomie IR connects any number of iOS or macOS devices to any number of infrared devices. Roomie IR-E works directly via Ethernet and does not require any additional hubs or adapters or emitter cables.

Roomie IR adapters are supported by Roomie Remote X and Roomie Remote 9.2.4 and above, and also provide an open network API. Firmware updates are managed by Roomie Remote X.

This model provides Ethernet support and requires USB-C for power.

Every Roomie IR adapter also doubles as a Proximity Beacon: using its built-in Bluetooth Low Energy radio, Roomie Remote can sense which room your iPhone or iPad is in and automatically switch you to that room as you move through your home. Proximity Beacon support requires Roomie Remote 10.4 or later on iOS or iPadOS and is not available on macOS.

Roomie Remote includes hundreds of thousands of infrared codes for virtually all devices with over 15 years of experience refining rock-solid codes, and also supports adding codes via the Custom Devices feature. After adding the adapter to your network and positioning the adapter in line or sight or adjacent to the target device, add the device in Roomie Remote.

On models with the built-in Infrared Learner, you can also teach the adapter directly: point an original remote at the adapter and Roomie Remote captures the code from its 38 kHz infrared receiver, so devices outside the database can be added without leaving the app.

Technical Specifications

• Dimensions 91 × 27 × 29 mm (3.58 × 1.06 × 1.14 in)
• Weight 42 g (1.48 oz)
• Connectivity 10/100 Mbps Fast Ethernet (RJ45)
• Bluetooth Bluetooth 5 LE – powers the Proximity Beacon feature; requires Roomie Remote 10.4+ on iOS/iPadOS (not macOS)
• Processor ESP32-S3 dual-core Xtensa LX7 @ 240 MHz, 512 KB SRAM, 16 MB Flash
• Infrared Transmitter High-Power IR LED Emitter (950 nm) – up to 10 m (33 ft) range forward or upwards. IR emits in both directions.
• Infrared Learner 38 kHz demodulating IR receiver (940 nm), built in on 110-E model only. Learns codes directly from an original remote. Tuned to the 38 kHz carrier used by most consumer remotes; nearby carriers (roughly 36–40 kHz, covering common NEC, Philips, and Sony remotes) learn reliably at close range. Remotes on distant carriers — 56 kHz, or Bang & Olufsen's 455 kHz — are not supported.
• Power 5 V ⎓ 500 mA via USB-C Typical: 220 mA (active transmit), <120 mA idle, power adapter and USB-C cable not included
• Enclosure PETG, indigo blue (IR100-E) or brick red (IR110-E) finish, Heat resistant to 80 °C (176 °F) continuous / 100 °C (212 °F) short-term – safe for mounting behind TVs, projectors, or in ceiling corners.
• Mounting 3M VHB adhesive pad with hook and loop removal included
• Operating Temperature 0 °C to 60 °C (32 °F to 140 °F)
• Certifications FCC, CE, RoHS
• Assembled in USA

What's Included

• IR100-E or IR110-E Adapter based on selection
• QuickStart Card
• 3M VHB Resealable Hook and Loop Fastener
• 1-Year Limited Warranty: Covers manufacturing defects. Excludes misuse, water damage, or modifications. Opening the case voids warranty. Email support@roomieremote.com with your serial number for claims.